Steinbach Poolrunner

Steinbach Poolrunner

This fully automatic, electric vacuum cleaner is suitable for cleaning all pools with a flat bottom.

The device is equipped with a 24V DC motor with jet drive and can be used for cleaning floor surfaces. The built-in filter system has a high-performance pump of 15,000L/h. It is controlled via a nozzle on the front and back. A 12m long cable is used to connect the control unit and the floor cleaner.

The Poolrunner is suitable for pools up to 8x4m.

• Model: HJ1009
• Width cleaning element: 210 mm
• Speed: max. 15 m/min
• Immersion depth: max. 2.0 m
• Filter fineness: 180 μm
• Cable length to the device: 12 m
• Pool size - floor area: 32 m²
• Water salt content (salt electrolysis): < 0.5 %.
• Water temperature: 10 °C - 35 °C
• Fully automatic and electric
• High performance filter system with 15.000 l/h

The Poolrunner does not have to be connected to a skimmer or an external filter system.

Jet propulsion

One nozzle on the front and one on the back direct the movement, so that dirt on the floor can be sucked in and filtered through the underside of the cleaner. The cleaned water then flows back into the pool via the nozzle opening. By rotating the jet nozzles, you can control whether the pool runner should clean straight or in "curves".

Handling

The top part can be opened easily with the four quick-release fasteners. The handles on the front and back make it easy to remove the vacuum cleaner from the water. The filter unit is located inside the device.

Filter fineness

Thanks to the high-quality and fine filter mesh, the dirt that is sucked up is retained in the filter system. The entire unit can be removed for cleaning.

Suction

There are two large openings on the underside of the floor cleaner, through which dirt is sucked into the filter unit. Automatic sealing strips prevent contaminants from flowing back into the pool.

Please note that the unit DOES NOT come with a UK plug.